xTool Screen Printer Kit

Since multi-colour cases require positioning operations, we recommend that the M1 and F1 be purchased with a single-colour set.

Yes, we have developed and designed and plan to market a size of 9 * 12 inches size mesh frame and the corresponding mesh fabric.

If you are already a professional screen printing enthusiast, you can try to remove the coating and then add emulsion again. Because our coating composition is completely consistent with the coating on the common screen - they are all cured with photosensitive glue. The main purpose of screen printing machines is to meet the needs of beginners to get started quickly, so we will persist in finding ways to lower the entry threshold for beginners.

Each laser-engraved screen is capable of supporting at least a hundred prints. xTool's screen can be reused just like any other screen available on the market. xTool's Screens are constructed with a commonly used 100 mesh stainless steel and a fully exposed photosensitive emulsion to ensure durability. Our Pre-coated Screens are designed to provide a more convenient first-time screen printing experience for all users, particularly starters at home, with each laser-engraved screen capable of supporting at least a hundred prints.

Yes, it can be cleaned and reclaimed. The screen plate we produce is made by using stainless steel mesh coated with photosensitive emulsion for curing, cutting into suitable shapes, and then wrapping the edges with paper. Therefore, the coating of the screen plate has the same characteristics as other screen printing screen plate coatings. So, if you are willing, you can use a mold release agent suitable for ordinary stencils to remove the film from the xTool stencil, peel off the coating on it, and then use photosensitive adhesive to recoat and solidify the stencil. and we don't sell emulsion.

For multi-colour printing on the P2, you will also need a Frame Fixing Piece for the P2, please refer to this tutorial to make your own.