xTool D1 Pro: 40W Laser Module Kit

SKU: P5010222

$2,275.00

xTool D1 Pro - World First 40W Diode Laser Module!

The xTool D1 Pro's 40W LEVEL UP module is an extremely powerful Diode laser cutter addition for your existing D1 PRO. It can cut up to 20mm softwood and 18mm hardwood in one pass and can engrave anything from wood, to stainless steel to slate at speeds of up to 24,000 mm/min.

In Stock

Price Match Guarantee. If you find the same stocked item, we will match it + Local Aus Support.

FAST SHIPPING

BUILT TO LAST

PREMIUM QUALITY

AUSTRALIAN STOCK

xTool D1 Pro: 40W Laser Module Kit FAQs

Does the xTool D1 Pro - 40W Laser Module work with the D1?

1. You can use the xTool D1 Pro 40W Laser Module on the xTool D1 frame just like you would with the xTool D1 Pro. In both cases, you will need to replace the plate, motherboard, and connecting cables (but note that the limit switch won't work).

2. Once you've installed the xTool D1 Pro 40W Laser Module on the xTool D1, you won't be able to use the xTool D1 series laser module (D1 1064nm module, D1 20W laser module, etc.) on the new plate and mainboard. If you need to use the xTool D1 series laser module again, you'll have to switch back to the xTool D1 plate and motherboard before using it.

That said, due to the inconvenience incurred during the switching process, we don't recommend using 40W laser module on xTool D1.

Can I switch any xTool D1 Pro Laser Module to the 40W one?

Yes! you can use the D1 Pro 5W laser module, D1 Pro 10W laser module, D1 Pro 20W laser module, 1064nm infrared laser module for D1 Pro.

Does the xTool D1 Pro - 40W Laser Module work with D1 Pro accessories like the Air Assist set, honeycomb table, RA2 Pro, Enclosures and the Extension Kit?

Yes it does!
Must-haves: The Honeycomb and the Air Assist Set. Processing on honeycomb avoids laser dmaging you working surface.

Plus, the 40W laser outputs stronger power and heat, having much more dust lying in the laser head. Therefore the Air Assist Set is necessary since it dissipates the heat, blows away the dust, protects the lens, and makes your project clean without burn marks.

Remember to clean your laser head and shield often. 90% of users also order RA2 Pro for cylindrical processing, like tumbler engraving, Christmas ball crafting, and ring engraving.

How large is the xTool D1 Pro - 40W Laser Spot?

0.1*0.15mm.

Does the xTool D1 Pro - 40W Laser Module cut clear acrylic?

No, it only cuts opaque acrylic. e.g. black, red, or orange etc...