• RA2 Pro: 4-in-1 rotary supports 90% cylindrical engraving.
• Risers
• Air Assist: For cleaner and smoother laser cuts.

• RA2 Pro: 4-in-1 rotary supports 90% cylindrical engraving.
• Air Assist: For cleaner and smoother laser cuts.
• Riser Base with Honeycomb: Supports higher objects, helps dissipate heat for cleaner cuts.

• RA2 Pro: 4-in-1 rotary supports 90% cylindrical engraving.
• Air Assist: For cleaner and smoother laser cuts.
• Riser Base with Honeycomb: Supports higher objects, helps dissipate heat for cleaner cuts.
• Smoke Purifier: Achieves a 99.97% purification rate.

Riser Base for M1 series

xTool M1 Air Assist Set

• 6-layer Filtration System：99.99% dust removal and odor absorption.
• Cyclone Sparation Technology: Capture Large Particles, 10X Pre-filter's Lifespan.
• World's First Ultra-Dense Carbon Mesh，97.97% Adsorbs odors.
• Intelligent Control: Auto-On/Off, Sync with xTool Lasers & Tailored Setting for Every Material.

Risers for xTool M1 RA2 Pro

• It supports cylinders up to 100mm in diameter.

• This pack contains 4 risers used on the 4 corners of xTool M1. Each riser can be used in 3 positions, increasing the heights by 41mm, 62mm, and 92mm, respectively.

• Product Dimension: 97*67*46mm

xTool M1 60° blade is made of Tungsten steel, which has exceptional hardness, corrosive resistance, and longer life(if used correctly).

The sharpness of the M1 60° blade managed to cut through thicker materials, such as leather, poster board, lighter fabric, etc. Using firmer materials, you can create longer-lasting crafts, preserving all of your best memories!

Product Dimension: 2.91*2.16*0.67 inches
Product Weight: 23g

xTool light-grip cutting mat is a reusable sticking mat that can flatten out all the tiny bumps or unevenness on cutting materials.

It can be used under the most common cutting materials: stick paper, self-adhesive vinyl, heat transfer vinyl, kraft paper, PVC, polyurethane leather, etc

Product Dimension: 17.1*13.7 inches
Product Weight: 130g

xTool Fabric-grip cutting mat is a reusable high stickiness mat that can flatten out all the tiny bumps or unevenness on the cutting materials; a must-have for a clean cut.

Different from LighGrip mat, FabricGrip cutting mat is perfect for cloth, felt, cotton, canvas, etc

Product Dimension: 17.1*13.7 inches
Product Weight: 130g

xTool M1 45° blade is made of Tungsten steel, which has an exceptional hardness, corrosive resistance, and longer life(if used correctly).

45° blade can cut amazing patterns on softer materials like paper, vinyl, cards, iron-on decals, etc. 

Product Dimension: 2.91*2.16*0.67 inches
Product Weight: 23g

This drive housing is designed for xTool M1 only and is compatible with both M1 45° blade and 60° blade(one at a time).

With the magic of both blades, M1 housing is powerful enough to deal with a good amount of materials, from paper, and cardboard, to felt, vinyl, and light-weight fabric

Product Dimension: 0.85 inches (Diameter)，2.40 inches (Height)
Product Weight: 80g

xTool M1: RA2 Pro Rotary + 4 Risers

• Irregular Shapes Fixing Specialist: xTool Flexible Fixture with 304 stainless steel pin bed (30x79mm) easily adapts to and fixes objects with irregular bases, ensuring a stable hold at any targeted angle.
• Boosts Batch Production: Once shaped, it also allows for rapid, repeatable positioning of objects without additional tweaks, optimizing batch processing.
• Flexible Fixture Combinations: By combining multiple fixtures, the xTool Flexible Fixtures further enhances batch processing efficiency and firmly holds larger, longer objects.
• Easy to Use: Easy press-twist action for fixture setup, beginner-friendly and immediate.
• Durable and Reliable: Made of 304 stainless steel and aluminum for reliable pressure resistance and corrosion defense.
• Note: The xTool Flexible Fixture is compatible with all xTool machines and requires a riser base or risers.