Wear eye protection within the ranges of 180nm-540nm any time you are working with an active laser.
5. Laser Enclosure for all-around protection
Utilizing an enclosure that surrounds the entire laser will eliminate the risk of accidental injury to people and pets by ensuring debris remains within the enclosure.
Lasers create fumes and smoke. It is important to create a proper ventilation system to ensure respiratory safetly. Ventilation could be through a window or an air purifying system.
xTool's Air Assist for lasering offers a 30L/min wind output, preventing smoke, distortion, and discoloration, ensuring clean cuts and smooth finishes. Upgrade your engraving and cutting with this tool.
8. Cleaning after lasering
It is important to clean the scraps, debris and dust from your working area after each project. This will reduce the risk of fire and/or exposure to harmful fumes or particles.
9. Maintenance for a longer life span
Dust and debris can accumulate within the machine and cause reduced efficiency, decreased performance, and potential damage.
10. Read the manual
Read the safety and operating instructions thoroughly prior to using the laser. Make sure you follow all the limits and know all the risks of operating your laser.
Choosing a selection results in a full page refresh.
[split_t4snt][split_t4snt]Add to Wishlist[split_t4snt][split_t4snt]
{ "message": ["🔥 Don't forget your Laser Cutter"," 🔥 Come back!"],"delay": 1000 }
